Brill 42 BM Manual Del Usuario página 22

Important for the filling level
indication:
If you set the cutting height to
minimum, this may under certain
GB
circumstances disturb the filling
level indication.
Handling the grass box
To remove the collecting box,
open the swivelling hood (fig. D,
pos. 5) and lift the collecting
box (fig. D, pos. 13) from the
top front at the handle area so
that the cuttings remain in the
collecting box.
After emptying, initially insert
the grass box between the
right and left guides and then
insert it at the front in the area
where the handle is. If the
collecting box is correctly
positioned, the swivelling
9. Maintenance, care and storage
Maintenance
Maintenance covers all work
that keeps your lawnmower in
good working order. You can
prevent accidents and failure of
parts by checking your lawn-
mower regularly (check that the
bolted connections are secure,
check for cracks and damage)
and by replacing damaged or
worn parts.
Repairs must only be carried out
by the service centres authorised
by the manufacturer or autho-
rised specialist dealers.
Warning! Always unplug
A
the spark plug connector
before carrying out all work and
repairs on your lawnmower.
Otherwise there is a risk of
injury.
22
hood is positioned against the
housing.
If the cutting height setting is
higher, the swivelling hood can
lift up due to the improved air
intake (Duo-Air-Management) of
the lawnmower. This effect does
not affect the function and safety
of the lawnmower. The swivel-
ling hood can be mechanically
locked in palace with the catch
lever (fig. F, pos. 14).
Warning! Before removing
A
the collecting box, switch
the engine off and wait until the
cutting tool comes to a halt.
Note:
To ensure the grass catcher is
filled as full as possible, you
should clean the grass catcher
and above all the air grille after
Check the grass catching device
regularly for wear or reduced
function. For safety reasons,
always replace worn or damaged
parts.
Store your lawnmower in a dry
place that is protected from frost.
Store your lawnmower out of the
reach of children.
Warning! Do not rotate
A
the blade in this position
(fig. H), as oil will otherwise be
pressed into the cylinder.
Warning! The tank cap
A
(fig. J, pos. 18) must be
closed when in the parking posi-
tion (fig. H) as petrol will other-
wise leak out.
each use. Keep the ventilation
slits (fig. A, pos. 9) and the sup-
port surfaces of the grass box
free from deposits.
Warning! Do not use your
A
hands or feet to remove
grass cuttings from the mower
housing. Use a suitable imple-
ment such as a broom or dust-
pan brush.
Mowing without the
Grass Catcher
Due to the high rear discharge
area, the cut grass is evenly
deposited on the lawn when
mowing without a grass box.
The filling level indicator does
not have a function when
mowing without a collecting
box.
Exchanging the Blade
Please only use original replace-
ments blades supplied by the
manufacturer. Original replace-
ment blades are available from
your specialist dealer.
Never use replacement parts or
accessories not supplied by the
manufacturer.
If the cutter bar is damaged, it
must be replaced due to the
associated problems with imbal-
ance. For safety reasons, the cut-
ter bar must only be replaced at
the service centres approved by
the manufacturer or by specialist
dealers.