[EN]
The clock can be set either via radio or via internet connection:
a) With integrated radio clock
If there is no internet connection, the Cash Box uses the integrated
radio clock and sets the time automatically. The Cash Box should not be
located in a highly shielded environment or any radiation (e.g. not in a
basement or near a microwave oven). For the time setting, ideally place
the device on a window. The time is received as soon as the red LED lights
up continuously.
b) With internet connection
Connect the Cash Box to your network via the Ethernet port. Make sure,
that the network cable was already connected before turning on the
device and that the Cash Box has got access to the internet. As soon as
the red LED lights up, the time is received.
Note: Over time, the Cash Box must retrieve the time. At the top right cor-
ner of the administration website dashboard you can see, when the time
must be obtained. If you have connected the Cash Box to the internet via
your network, no further action is necessary.
3.2. Set up Bluetooth billing devices and thermal receipt printers
The billing devices, which you want to use with the Cash Box, need to be
connected via Bluetooth. As long as no billing device has been connected
via Bluetooth, the red LED lights up permanently. The coupling of devices
is made through the administration website.
14