ratiotec RS 2000 Manual Del Usuario página 15

[EN]
Important: To connect a billing device or printer via Bluetooth, you need
to put it into the "coupling mode". Please look up the procedure for your
particular device in the operating instructions of the billing device or
the printer.
To connect billing devices, they must be paired via Bluetooth. You can
set it up via the menu "Wireless devices> Counters". You can search for
devices in range using the "Scan devices in range" button. If a device was
found, you can give it a custom name. Confirming the „connect" button
connects the device. This way, you can better determine the location. The
devices will then be listed.
As soon as the billing device is connected to the Cash Box, the red LED
goes out and the green LED lights up permanently. The box is now ready
to receive billing data from the connected device.
Optionally, you can also connect a thermal receipt printer via Bluetooth to
the Cash Box (Menu "Wireless Devices> Printer"). The printer must belong
to the device class "Bluetooth-Printer".
15