Kit Assembly - Metra 99-6517HG Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART 99-6517HG
ISO DIN radio provision
1. Mount the pocket to the radio brackets with the
(4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Slide the radio into radio brackets and secure
with screws supplied with the radio. (Figure B )
3. Locate the factory wiring harness and antenna
plug in the dash. Metra recommends using
the proper mating adapters from Metra
and/or AXXESS.
4. Mount the new radio assembly into the dash and
reassemble dash in reverse order of disassembly.
METRA. The World's best kits.
®

Kit Assembly

(Figure A)
(Figure B)
® metraonline.com
K P
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION