Gigaset E630 Manual De Instrucciones página 10

Gigaset E630-E360A / Turtle LUG - USA en / A31008-XXXXX-XXXX-X-XX / starting.fm / 3/27/15
Getting started
¤
Insert the batteries with the polarity in the
right direction (for correct +/- direction,
see diagram).
¤
Hold the battery cover at a slight angle and insert
the bottom into the casing first
¤
Then press the cover
¤
Insert the locking disc as shown (at an angle of
approx. 20°)
markings.
¤
Turn locking disc clockwise to the end stop
The locking disc is closed once the markings on the
disc are aligned with those on the cover
To open the battery cover, for example to change the
batteries:
¤
Turn the locking disc anti-clockwise to the end stop
6 (approx. 20°) and remove
¤
Place your fingernail in the notch on the side
between the cover and the casing
the cover
Belt clip
The handset has notches on each side to attach the belt clip.
u
To attach — press the belt clip onto the back of the handset so that
the tabs on the belt clip click into place in the notches.
u
To remove — press the centre of the belt clip firmly with your right
thumb, push the fingernail of your left thumb up between the clip and
the casing and pull the clip in an upward direction.
8
1
2 until it clicks into place.
3
. Pay attention to the arrow
7 .
.
9
.
4 .
5 .
and remove
8
1
4
5
7
6
9
2
3
8
en fr es