Technoline WS9040 Manual De Instrucciones página 50

then be displayed on the weather station. If this does not happen after 2 minutes, the batteries will need
to be removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the weather station. Then within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is
successfully received. If this is not happen, user shall restart the setting up from step 1.
Note : User shall insert the batteries into the third transmitter within 45 seconds after the weather
station displays the information of the first transmitter.
8. In order to ensure sufficient 868 MHz transmission however, the distance between the weather station
and the transmitter should not be more than 100 meters (see notes on "Positioning" and "868 MHz
Reception").
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as described above.
Should transmission problems occur, it is necessary to remove the batteries from all units and start again the
set-up from step 1.
RESETTING
The weather station and the thermo-hygro transmitter need to be reset when one of the following conditions
occur:
Unsuccessful 868MHz signal reception.
•
46