Preparations For Use - Dräger X-plore 8000 Instrucciones De Uso

Use
3.6.2 Visor
Visor PC for
X-plore Protective visor
3
Part-No.: R59901
1
EN 166 1 B 9 3
Date of manufacture: 14
2
1 Approval marking
2 Date of manufacture (example)
Explanation of the codes in the approval marking:
1 Optical class
B Protection against medium-energy impacts
9 Protection against splashes of melted metal and penetration by
hot solid objects
3 Protection against liquid drops and splashes
The visor's date of manufacture is coded: the year is specified in figures, the
quarter in dots.
Code Meaning
3rd quarter 2014
14
4th quarter 2014
14
0158
1
3 Part number
Symbol Explanation
Follow the instructions for use
Maximum storage area humidity ≤ 90 %
<90%
+55°C
Storage temperature range -5 °C to +55 °C
-5°C
4 Use
4.1

Preparations for use

Perform the following activities prior to use:
1. Check protective visor for damage.
WARNING
Reduced visibility or limited protective effect by scratched or damaged
visors!
► Replace scratched or damaged visors.
2. Adjust protective visor to the correct size (see "Adjusting the protective visor
to correct size", page 13).
3. Adjust the swivel mechanism (see "Adjusting the swivel mechanism",
page 13).
4. Remove transport foil from visor.
5. If necessary, attach a protective foil (see "Replacing the protective foil",
page 14).
6. Connect protective visor to respiratory protective device. Make sure that the
device is switched on and breathing air is available.
7. Donning the protective visor (see "Donning the protective visor", page 13)
Dräger X-plore
®
8000 Protective Visor