Technical Data; Setting The Appliance - Stalgast 803021 Instrucciones De Uso

3. TECHNICAL DATA

Unit's equipment (page 2):
1 - Handle, 2 - Hood, 3 - Basket guide, 4 - Control panel, 5 - Body, 6 - Adjustable feet, 7 - Power supply,
8 - Water supply, 9 - Drain hose
Model
Dimensions (WxDxH)
Supply voltage
Frequency
Maximum power consumption
Water supply pressure
Water supply temperature
Water hardness in the water supply system
Water consumption
Boiler capacity
Maximum water level in the chamber
Tank capacity
Standard cycle duration*
Noise level
Protection
Net weight
Type of power cable
Washing water temperature
Rinse temperature
The dishwasher has an automatic steam function (integral part of the washing cycle).
* The duration of the cycle is given for the supply water temperature of 50
4. INSTALLATION

4.1. Setting the appliance

The appliance must be delivered to the installation site, unpacked, and its condition should be checked. In
case of damage to the appliance or any of its components, the shipping company must be notified imme-
diately.
Connections to the devices must conform to the standards in force at the installation site. The manufacturer
is not liable for any injury or damage to the product resulting from failure to comply with the standards in
force at the installation site. Before installing the appliance, make sure that the moisture-sensitive compo-
nents are properly protected against wetting, e.g.: during the washing of the appliance.
The appliance should be set at a desired location and then the protective packaging should be removed.
The appliance should be leveled using a spirit level and the four adjustable feet, thus ensuring stable opera-
tion. Any other way of leveling the appliance should be approved by the manufacturer.
The packaging materials should be kept away from children and pets, as they can cause an accident. All
materials used to pack the product are environmentally friendly and can be safely stored in a suitable place.
Recyclable components are marked as follows:
• PE – polyethylene: external packaging components, manual jacket, fastening components;
• PP – polypropylene: grips;
• Wooden and cardboard components must be left in places intended for this purpose in accordance
with applicable law.
It is forbidden to store the appliance and its components directly in the environment.
803021
728x816x1505 mm
400V/3+N+PE
50 Hz
10,8 kW
2-4 Bar
max. 55
5-6
2,5 l/cycle
9,5 l
175 mm
20 l
120/180 s
65 dB(A)
IPX3
94 kg
H07RN-F 5x2,5mm
° °
55 C (131 F)
° °
30-90 C (86-194 F)
°
- 29 -
803035, 803036, 803037
o
C
°
dH
90/120/180 s
96,5 kg
2
° °
60-65 C (140-149 F)
° °
82-90 C (181-194 F)
C.