Two-Hole Punching; Transporting The Unit; Maintenance And Care; Specifications - Esselte LEITZ comBIND 500 Instrucciones

Maintenance and care

• To prevent damage to the punching mechanism, empty the cuttings tray
• In case of defects: Do not attempt to repair the unit yourself. Contact the manufacturer for any
required repairs. Read guarantee declaration for further information.
• To clean the housing, wipe the outside with a damp cloth. Do not use any chemicals for
cleaning.

Specifications

Operating method
Paper size
Punching dies
Punching depth
Punching capacity
Plastic comb size
Net weight
Dimensions (W x D x H)
Subject to technical changes without prior notice.
8


Two-hole punching


Caution! To prevent damage to the punching mechanism, do not
punch more than 25 sheets of 80-gramm paper or two films of 0.2 mm
at the same time. Also, empty the cuttings tray regularly.

Caution! Risk of squeezing fingers. Take hold of the punching lever
with both hands in the middle of the grip plate.
• Set the paper stop to the paper format used.
• Insert the sheets into the front slot
• Pull the punching lever
• Push the lever up again and remove the punched sheets.

Transporting the unit

• Carry the unit with both hands. To prevent damage, do not use the
punching lever as a carrying handle.
.
C
all the way down.
E
regularly.
J
21 rectangular (US pitch), 2 round
Adjustable in two steps (2.5 mm, 4.5 mm)
25 sheets (80 g/m² paper) or 2 transparent 0.2-mm films
450 mm x 550 mm x 170 mm
Manual
A4, US letter, A5
6–51 mm (up to 500 sheets)
13 kg