Descargar Imprimir esta página

Homelite HHT2655 Manual De Utilización página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
GB
F
D
E
I
This engine is certified to operate on unleaded petrol
intended for automotive use with an octane rating
of 87 ([R + M] / 2) or higher.
Do not use any type of pre-mixed petrol / lubricant from
fuel service stations, this includes the pre-mixed petrol
/ lubricant intended for use in mopeds, motorcycles,
etc.
Use synthetic 2-stroke lubricant only. Do not use
automotive lubricant or 2-stroke outboard lubricant.
Mix 2% synthetic 2-stroke lubricant into the petrol.
This is a 50:1 ratio.
Mix the fuel thoroughly and also each time before
fueling.
Mix in small quantities. Do not mix quantities larger
than usable in a 30 day period. Synthetic 2-stroke
lubricant containing a fuel stabilizer is recommended.
FILLING THE TANK
Position the hedge trimmer on its side with the fuel
cap pointing upward.
Clean surface around fuel cap to prevent
contamination.
Loosen fuel cap slowly to release pressure and to
keep fuel from escaping around the cap.
Carefully pour fuel mixture into the tank. Avoid spillage.
Prior to replacing the fuel cap, clean and inspect
the gasket.
Immediately replace fuel cap and hand tighten.
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.
Note: It is normal for smoke to be emitted from a new
engine during and after first use.
WARNING
Always shut off engine before fueling. Never add
fuel to a machine with a running or hot engine.
Move at least 9 m from refueling site before
starting engine. Do not smoke!
1 Litre
+
2 Litres
+
3 Litres
+
4 Litres
+
5 Litres
+
P
NL
S
DK
N
20 ml
=
40 ml
=
60 ml
=
50:1 (2%)
80 ml
=
100 ml =
FIN GR HU
CZ RU
RO PL SLO HR TR EST LT
English
STARTING AND STOPPING (Fig. 3&4)
WARNING
When the engine starts with the trigger locked,
the blades will move. Keep body, objects, and
obstructions away from blades. Failure to keep
away from the blades can result in serious injury.
OPERATING the HEDGE TRIMMER (Fig. 5)
WARNING
Read the safety information for safe operation
using the blade. Extreme care must be taken
when using blades to ensure safe operation.
Refer to Specific Safety Rules.
WARNING
Always keep both hands on the hedge trimmer
handles. Never hold shrubs with one hand and
operate hedge trimmer with the other. Failure to
heed this warning can result in serious injury.
WARNING
Clear the area to be cut before each use.
Remove all objects such as cords, lights, wire,
or loose string which can become entangled in
the cutting blade and create a risk of serious
personal injury.
MAINTENANCE
WARNING
When servicing, use only iden ti cal replacement
parts. Use of any other parts may create a
hazard or cause product damage.
WARNING
Always wear safety goggles or safety glasses
with side shields during product operation. If
operation is dusty, also wear a dust mask.
WARNING
Before inspecting, cleaning, or servicing the
machine, shut off engine, wait for all moving
parts to stop, and disconnect spark plug wire and
move it away from spark plug. Failure to follow
these instructions can result in serious personal
injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, Lubricant, grease, etc.
15
15
LV
SK BG

Publicidad

loading