Dash Disassembly - Metra 95-7639HG Instrucciones De Instalación

1. Remove the (2) Phillips screws securing
the knee bolster panel below the
steering column, and then unclip the
panel. It is not necessary to completely
remove the panel. (Figure A)
2. Unclip and remove the passenger door
sill and kick panel. (Figure B)
3. Remove the (5) Phillips screws securing
the glove box and then remove. There
are (2) screws below the glove box, and
(3) screws exposed when you open the
glove box. (Figures C and D)
Continued on next page
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
Upper screws
(Figure C)
Lower screws
(Figure D)
|
386.257.1187 MetraOnline.com