Complete The Installation - Kohler K-13710 Guia De Instalacion

Square-Head
Setscrew
Wall Support
Tube
Wall Bracket
Supply
Stop
Compression
Fitting

2. Complete the Installation

Position the wall support tube in the wall bracket, and connect
the compression fittings with the fiber washers in place.
Tighten the plated nuts, but do not overtighten.
Secure the wall support tube to the wall bracket with two
square-head setscrews.
Install the lavatory or sink supply.
Turn on the water supply.
Open the supply stops with the key and check for leaks. Repair
as needed.
Adjust the maximum temperature setting by turning the regulator
pin on the top of the control fitting. Turn the pinclockwise to
reduce and counterclockwise to increase the maximum water
temperature.
Kohler Co.
Install lavatory or
sink supply.
Plated
Nut
Fiber Washer
5
Turn Pin to Adjust
Maximum Water
Temperature
Compression
Fitting
105334-2-AB