OHAUS a-AB33M1 Manual De Instrucciones página 31

Analyzer and Bench Meter
4. If you press the
finish of the process. After that, press the
to the setup menu.
Note: This function is only available for a-AB41PH.
Reset (a-AB41PH)
This feature is only visible to the administrator (user ID 0).
Note: This function is only available for a-AB41PH.
Factory reset
Enter this sub-menu to reset the meter to its factory default settings.
To reset:
1. Touch the Menu icon
2. Touch i-Steward, and then touch Reset.
3. Touch Factory reset. The screen displays the reset information.
4. Press the
Parameter Reset
Enter this sub-menu to reset all the parameters under Setup menu.
To reset:
1. Touch the Menu icon
2. Touch i-Steward, and then touch Reset.
3. Touch Parameter reset. The screen displays the reset information.
4. Press the
Reset password
Enter this sub-menu to reset user password.
1. Touch the Menu icon
2. Touch i-Steward, and then touch Reset.
3. Touch Reset password. The screen displays the user ID of which to reset. Press
the or
4. Touch the number of the user ID on the screen to confirm your selection. The
meter will reset the password to 0000 for the user.
button in the previous step, wait for the display to show the
to enter menu option.
button to confirm, or press the
to enter menu option.
button to confirm, or press the
to enter menu option.
button to switch between different user IDs.
button or the
button to cancel.
button to cancel.
EN-29
button to return