Care And Cleaning - WeatherTech Easy-On 50281 Instrucciones De Instalación

Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Slide each end bracket over hood edge, ensuring that each is centered on the protective film previously installed.
bracket
protective film
hood
9
Adjust as needed.
Turn both of the hood bumpers counter clock-
Close Hood.
wise 1 1/2 turns.
10 11
Apply (4) bump ons to surface of hood.
12

Care and Cleaning

•
Wash only with mild soap & dry with a clean cloth.
Page 3 of 3
© 2015 by MacNeil IP LLC