Descargar Imprimir esta página

Rev-A-Shelf 5743-20-CR-1 Instrucciones De Instalación página 3

Publicidad

STEP 4
Re-attach the soft-close
mechanism.
STEP 5
Tape the Top Slide Template
to your pantry ceiling (See Fig.
4A). Mark the (3) indicated hole
locations on the template and
drill 1/8" pilot holes. Align the
front of the slide with the front
of the face frame and center
the slide in the cabinet. Attach
to top of cabinet or to the
spacer board from Step 3 using
(3) #8 1/2" wood screws
(See Fig. 4B).
STEP 6
The bottom of the steel frame
sits on top of the bottom slide
as shown in Figure 5. Use (2)
M6 screws and accompanying
washers to attach the frame to
the bottom slide.
#2
STEP 7
Slide the top portion of the
frame up so that the top slide
is concealed and the (2) pins
in the top slide insert into the
(2) bushings in the top of the
frame as shown in Figure 6.
NOTE: The frame should not
touch the cabinet.
FIGURE 4A
1
8
INSTALLATION INSTRUCTIONS: 5300/5700 SERIES PULLOUT PANTRY
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
5300/5700 SERIES PULLOUT PANTRY TOP SLIDE TEMPLATE
cutting line for small cabinet
cutting line for small cabinet
FIGURE 5
FIGURE 6
CENTER LINE
T-5700-TOP-0117
FIGURE 4B
3

Publicidad

loading