Product Overview; Use; Inserting/Removing The Battery Pack; Checking The Battery Charge - Formula 1 LB200 Manual Del Usuario

EN
•
Stop charging immediately if the battery pack
becomes very hot whilst charging. If the battery
pack becomes very hot or expands, the battery
pack is defective and must not be used again.
Allow the battery pack to cool down and repla-
ce the battery pack.
•
Regularly check the charge of the battery pack
when stored for extended periods.
Produc t Over-
view
1. Release button
2. Charge level button
3. Charge level LEDs

Use

Inserting/removing the battery pack

1. Insert the battery pack in the device until the
battery pack clicks into place.
2. After suing the device, press the release
button (1) on the battery pack and remove the
battery pack.

Checking the battery charge

1. Press the button (2) on the battery pack.
2. The LEDs (3) indicate the charge:
Display Meaning
3 LEDs Battery fully charged.
2 LEDs Approx. 50 % battery charge.
1 LED Battery almost drained or drained.
Charge battery.
10 f1.mts-gruppe.com
Technic al
data
Model LB200
Item number 10785
Rated voltage
Capacity 2.0 Ah
Number of energy cells 5
Charging time < 40 min
Charging temperature:
Operating temperature
Storage temperature
Recommended chargers
Cleaning, c are
and mainte-
nance
Minimal care will ensure your device remains
functional for years.
•
Clean the product with a soft, dry cloth.
•
Store the machine in a clean, dry place.
•
Check the device for damage before each use.

Service

Should you have any questions regarding com-
missioning or operating in spite of studying these
operating instructions, or if a problem should oc-
cur against all expectations, please get in contact
with your specialist supplier.

Disposal

LB400
10786
20 VDC
4.0 Ah
10
< 60 min
0°C~ +45°C
-10 °C ~ +45 °C
-15 °C ~ +40 °C
BC400 (10784)