SICK WSE26 Instrucciones De Operación página 10

8020358.14CS | SICK
Subject to change without notice
Figure 2: Alignment 1
2 Sensing range
Observe the application conditions: Adjust the distance between the sender and the
receiver according to the corresponding diagram [see
ating reserve).
If several through-beam photoelectric sensors which are installed next to one another are
to be used, we recommend swapping the sender/receiver arrangement at every second
through-beam photoelectric sensor and ensuring that there is sufficient distance between
the through-beam photoelectric sensors. By doing this, mutual interference can be pre‐
vented [see figure 1].
Function reserve
10,000
WSE26P-xxxxx1xx, WSE26I-xxxxx1xx
1,000
100
10
1
0 10 20
(0.39) (0.79) (1.18)
Figure 4: Characteristic line 1
3 Time function setting
1
M 0
T4 T1
T3 T2
WSO
WEO
Figure 3: Alignment 2
1
0
0
Sensing range
Figure 5: Bar graph 1
30 40 50 60
(1.57) (1.97) (2.36)
Distance in m (feet)
COMMISSIONING
WEO
figure 4] (x = sensing range, y = oper‐
50
20 40
(65.62) (131.23) (196.85)
Distance in m (feet)
Sensing range typ. max.
7
60
60
9