General Safety Notes; Notes On Ul Approval; Intended Use; Operating And Status Indicators - SICK GSE2 Flat Side Instrucciones De Operación

1

General safety notes

2

Notes on UL approval

3

Intended use

4

Operating and status indicators

8023329.18HX | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture, contamination and
UV radiation (sun light).
These operating instructions contain information required during the life cycle of
■
the sensor.
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
The GSE2F(S) is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (WS) and a receiver (WE) are required for operation. If the product is
used for any other purpose or modified in any way, any warranty claim against SICK AG
shall become void.
1 2
LED indicator green: supply voltage active
1
Receiver: LED indicator yellow: status of received light beam
2
GENERAL SAFETY NOTES
1 2
1
5