Publicidad
Idiomas disponibles
Idiomas disponibles
8.
Position the LED module/assembly in its mounting location. Carefully tuck
the connector (MODLED2F, MODLED3F) into the recessed area in the back of the bezel.
Secure the assembly in position with the provided #10 x 3/4" screws.
C.
Service.
The Federal factory will service your equipment or provide technical assistance
with any problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be
accompanied by Return Material Authorization. This R.M.A. can be obtained from a local
Distributor or Manufacturer's Representative.
At this time a brief explanation of the service requested, or the nature of the
malfunction, should be provided.
Address all communications and shipments to:
Federal Signal Corporation
Emergency Products Division
Service Department
2645 Federal Signal Drive.
University Park, IL 60466-3195
D.
Replacement Parts.
Description
7010A014-08
7011182A-12
1461301A
1461256A
8617105A
8617109A
8617106A
8617138A
8617139A
8617140A
8617111A-01
8617111A-08
8617111A-09
8617111A-02
8617112A
Part No.
Module Mounting Screw #8 x 1/2"
Bezel Mounting Screw #10 x 3/4"
Wiring Harness, Double Module
Wiring Harness, Triple Module
Single Bezel
Double Bezel
Triple Bezel
Single Bezel Gasket
Double Bezel Gasket
Triple Bezel Gasket
Red LED Module Assy.
Blue LED Module Assy.
Green LED Module Assy.
Amber LED Module Assy.
Accessory Kit (Connector)
-5-
Publicidad
