Publicidad
Tačka za prišivanje elastike – Navodilo za uporabo
Navodilo za uporabo
Overlock: Set the machine for a 3- or 4-thread overlock,
using the needles depending on the tape width.
Overlock: nastavite stroj za šivanje s 3- ali 4-nitnim
overlock šivom z uporabo igel, glede na širino
Coverstitch: Set the machine for a coverstitch, using up to
elastike.
three needles, depending on the tape width.
Prekrivni šiv: nastavite stroj za šivanje prekrivnih
šivov z uporabo največ 3 igel, glede na širino elastike.
1. Loosen screw 5 to slide the guide 6 to suit the width of the elastic tape, tighten the screw 5.
1. Odvijte vijak (5), da nastavite vodilo (6) na ustrezno širino elastike, nato
2. Raise the presser foot and snap on the "Elasticator foot".
zategnite vijak (5).
3. Loosen screw (2) so that opening (4) of the brake (1) is opened by 1.5 to 2 mm.
2. Dvignite tačko in namestite tačko za prišivanje elastike.
4. Place elastic tape (3) into the guide (6) and pass it back under the foot.
3. Odvijte vijak (2), da se odprtina (4) na zavori (1) odpre za 1,5 do 2 mm.
5. Tighten brake (1) with the screw (2). The more the screw (2) is turned, the stronger the pressure
4. Namestite elastiko (3) v vodilo (6) in pomaknite nazaj pod tačko.
of the brake (1) on elastic tape, thus the greater the gather effect.
5. Zategnite zavoro (1) s pomočjo vijaka (2). Večje zategovanje vijaka (2) pomeni
6. Adjust the stitch length between 2.5 and 4.
večji pritisk zavore (1) na elastiko, kar zagotavlja večji učinek nabiranja.
7. Lower the presser foot and testsew, to define the amount of gather suitable for the project.
6. Nastavite dolžino šiva med 2,5 in 4.
7. Spustite tačko in naredite testni vzorec, da določite ustrezno stopnjo
nabiranja.
Elasticator foot – Instructions
Zategnite
Odvijte
Elastika
5
Publicidad
