Configuring The El Range Directly On The Binoculars - Swarovski Optik 69627 Manual Del Usuario

5. To switch off Bluetooth, press the mode button for
2 secs.
5.4 CONFIGURING THE EL RANGE DIRECTLY ON
THE BINOCULARS
Selecting the programs and adjusting the settings. Press and
hold the mode button for 2 seconds. This takes you to the
main menu.
Press the measurement button to go to the relevant settings
under the menu item. Use the mode button to switch between
settings and confirm your selection via the measurement
button.
Press and hold the mode button for 2 seconds to leave the
menu. Your settings have been saved.
The enclosed Quick Guide tells you more about navigating
the menu.
Note:
Changing the battery does not affect your settings.
6. MENU ITEMS IN DETAIL
6.1 TRACK (TRACKING ASSISTANT)
Select one of the last three measurements directly on the
binoculars in order to be guided to the target area by the
EL Range.
Measure back to your original starting point (from where the
selected measurement was made).
The display shows how many meters/yards to left/right or
forward/backward you have to move to get into the measu-
rement area. Measuring range is usually more accurate
than measuring direction, so you see an arc-shaped search
field. Once you no longer need to correct the range and the
36
lateral deviation has been reduced
to a minimum, it is best to start the
search in the form of an arc, keeping
a constant distance from the location
of the original measurement.
EL RANGE / EN EL RANGE / DE