Publicidad
Janome Instruction Manual
r
t
y
u
i
(1)
www.toews.com
(2)
12
r r r r r Start/stop button
Press this button to start or stop the machine.
The machine starts running slowly for the first few
stitches; it then runs at the speed set by the speed
control lever. The machine will run slowly as long as this
button is pressed.
• The button is lit green when the machine is stopped.
• The button is lit red when the machine is running.
Notes:
• The Start/stop button cannot be used when the foot
control is connected to the machine.
• If you start the machine with the presser foot up, the
Indicator window will show
Lower the foot then restart the machine.
t t t t t Elongation button
Stitches
their normal length by pressing this button (see page
35).
y y y y y Stitch width adjusting button
Press "+" or "–" to change the stitch width or needle drop
position (see page 36 or 42).
The button is lit green and the indicator will show the
stitch width or needle drop position.
u u u u u Stitch length adjusting button
Press "+" or "–" to change the stitch length (see page 36).
The button is lit green and the indicator will show the stitch
length.
i i i i i Stitch pattern selection button
Press the desired stitch pattern selection button to
select the desired stitch.
(1) To select the pattern on the left side of pattern
selection button, press it once.
The button is lit green and the pattern on the left
side is selected.
(2) To select the pattern on the right side of pattern
selection button, press it twice.
The button is lit orange and the pattern on the right
side is selected.
* The indicator window will show the pre-set stitch length
of the selected stitch pattern.
* The alphabet under the stitch pattern indicates the
suitable presser foot type for the selected stitch
pattern.
Note:
Raise the needle above the fabric when selecting the
stitch pattern.
Janome Sewing Machine
.
can be elongated up to five times
TB30 Owners Manual/ User Guide
Publicidad
