Jotul Scan Andersen 10 Instrucciones Para Instalación página 36

ENGLISH
Fig. 7
1. Remove the cast iron cover (Fig. 7-1) from inside the burn
chamber.
2. Fit the cast iron cover in the top outlet hole.
Fig. 8
1. Attach the loose outlet collar (Fig. 8-1) which is inside the
ash pan to the outlet using the retaining clips and screws
from the service package.
2. When refi tting, follow the same procedure in reverse order.
36
4.6 Fitting the soapstone panels
(optional extra)
The convection plates provided with the product must fi rst be
removed before the soapstone sides can be fi tted.
1. Remove the baffl e (see Fig. 3).
2. Remove the exhaust defl ector (see Fig. 4).
Fig. 9
1. Remove the side burn plates (Fig. 9-1).
1
Fig. 10
1. Unscrew the nuts (fi g. 10-1) holding the upper convection
plate in place.
2. Unscrew the set screws (fi g. 10-2) so they are not protruding
on the outside.
3. Unscrew the screws (fi g. 10-3) holding the lower convection
plate in place.