Networking The Pdu; Features - Tripp-Lite PDUMH30NET El Manual Del Propietario

Installation

Networking the PDU

For network configuration instructions, please refer to the WEBCARDLX owner's
manual (PN 93358E) included with this product.

Features

Output Receptacles: These receptacles distribute AC power to connected
equipment. When a receptacle is live, the associated green LED is illuminated.
208/230V IEC 60320 C13
Output Receptacles
(PDUMH30HV19NET,
PDUMH30HVNET &
PDUMH32HVNET)
Primary AC Input Power Cord: Connect the input plug to a compatible AC power
outlet. The cord is permanently attached to the PDU.
L5-30P Input Plug: 120V,
(PDUMH30NET)
Meter Select
LOAD (AMPS)
18-11-324-933686.indb 5
208/230V IEC 60320 C19
Output Receptacles
(PDUMH30HV19NET)
L6-30P Input Plug: 208/230V,
(PDUMH30HVNET &
PDUMH30HV19NET)
Digital Load Meter (Ammeter): The digital load meter
displays the load in amps. It may be set using the Meter
Select switch to display the PDU's total connected load
Bank 1
(all 16 outlets-both LEDs illuminated), or the load carried
Bank 2
by either the upper bank (Bank 1 LED illuminated) or
lower bank (Bank 2 LED illuminated) of 8 outlet
receptacles. For models with SNMP Network Card
installed, press and hold the switch to display the IP
address of the SNMP card in the PDU.
120V NEMA 5-15/20R Output
Receptacles (PDUMH30NET)
IEC 309 3-Pole Input Plug:
208/230V, (PDUMH32HVNET)
5
1/25/2019 3:24:38 PM