Electrical Installation; Supply Voltage - SICK LGT 015 Instrucciones De Operación

Operating instructions
LGT
5

Electrical installation

188
8 007 557/S711/2008-06-04 © SICK AG • Safety Systems • Germany • All rights reserved
Electrical installation
Preassembled connection cables must be used for
connecting the control unit to the sender and receiver strips.
These cables must be connected to the plug connectors
provided in the control unit (Fig. 4, Appendix).
The number of connected sensor pairs must be set at DIP
switch 3 in the control unit:
ON 1 connected sensor pair
OFF 2 connected sensor pairs
5.1

Supply voltage

Depending on the type of control unit, a supply voltage of
24 V DC or 115/230 V AC must be provided and connected
as per Figure.
optional
or
Chapter 5
Switch
No.