Tabla de contenido
Publicidad
Monitors
Progress
Progress Monitors
The Multi-Charger Plus indicates the status of a battery pack with an LED located below each
pocket. In addition, the charge/analyze pocket has an LCD screen providing additional
information on the battery in that pocket.
Interpreting the LEDs
Each pocket on the Multi-Charger Plus has an LED. The LED located at the base of each pocket
communicates the status of the charge operation.
Note:
RED
- on any pocket
Continuous
Flashing
RED FLASHING
- on every pocket
Battery charger fault or failure.
GREEN
- on any pocket
Continuous
YELLOW
- on any pocket
Continuous
NO LIGHT - on a pocket
No battery pack installed.
Defective or damaged battery pack or charger. Refer to Troubleshooting Guide.
NO LIGHT - on every pocket
No battery packs installed.
No power applied to the Multi-Charger Plus.
E-EQ-MX3MCPLUS-F-ARC
On initial power-up, all five pocket LEDs will light
Battery pack -
Battery pack fault or failure.
Battery charger timeout period expiration.
Battery pack charge complete - Ready.
Battery pack temperature is out of range - Standby.
yellow
Charging (any charge pocket).
Charging or analyzing (charge/analyze pocket).
MX3 Multi-Charger Plus User's Guide
for a few seconds.
15
Publicidad
Tabla de contenido
