Festo SFC−LACI IO Serie Manual De Instrucciones página 24

Requirements to be met by the power supply
U [V] Use
Load supply
48 VDC
+5/−10% (pins A1, A2)
24 VDC Logic supply
±10% (pins 1, 2)
Local outputs
OUT1/2
Hardware enable
(pins 3, 5)
Total
24 VDC Only SFC−LACI−IO:
Outputs of the
±10%
controller inter
face
24
I [A]
Nominal current: 10 A.
Peak current: 20 A.
Internal fuse: 16 A slow−blow.
Nominal current: 0.4 A.
Peak current :0.8 A (without local
outputs)
Internal fuse: 4 A slow−blow.
Supply via logic supply (pins 1, 2).
Max. 1 A permissible per output.
Minimum current on contact
Dependent on the system architec
ture, up to 3.8 A.
Idle current: 0.05 A.
Peak current (max. 0.5 A per output):
2.1 A
Festo GDSP−SFC−LACI−ML 0812NH English