Mounting Guidelines - GoPro HERO 6 BLACK Manual Del Usuario

MOUNTING
ATTACHING MOUNTING BUCKLES TO MOUNTS
1. Flip up the mounting buckle plug.
2. Slide the buckle into the mount until it clicks into place.
3. Press down on the plug so that it sits flush with the buckle.
PRO TIP: If you mount your HERO6 Black upside down, the camera
automatically changes the orientation of your image to be right-side up. For
more information, see Auto-Rotation
82
(page 76).
MOUNTING
USING CURVED + FLAT ADHESIVE MOUNTS
The Curved + Flat Adhesive Mounts make it easy to attach the camera to
curved and flat surfaces of helmets, vehicles, and gear. With the mounting
buckle, the frame can be clicked on and off the secured adhesive mounts.
Curved Adhesive Mount

MOUNTING GUIDELINES

Follow these guidelines when attaching adhesive mounts:
• Attach the adhesive mounts at least 24 hours before use.
• Adhesive mounts must be mounted only on smooth surfaces. Porous
or textured surfaces do not enable a proper bond. When applying
the mount, firmly press it into place and ensure full contact over the
entire surface.
• Apply adhesive mounts to clean surfaces only. Wax, oil, dirt or other
debris reduce adhesion, which can result in a weak bond and risk of
losing the camera should the connection fail.
• Attach adhesive mounts in room temperature conditions. Adhesives do
not bond properly if applied in cold or damp environments to cold or
damp surfaces.
Flat Adhesive Mount
83