Twin-Star International 26MM1754 Instrucción De Montaje página 6

3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Then locate Center Shelf (H) and lay fi nished side
up on top of completed assembly from step 2. From
the inside, attach the Center Shelf using Bolts (AA)
and Washers (BB) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC
Wood Dowel
4. Insert one Wood Dowel (CC) into each of pre-drilled
holes. Push the Right Side Panel (F), Left Side
Panel (E) and Support Divider (L) snug to completed
assembly from step 3. Attach the three Panels using
Bolts (AA) and Washers (BB) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC
Wood Dowel
5. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the Assembly from step 4. Then
locate Mantel/Top (G) and lay fi nished side up on
top of completed assembly. From the inside, attach
Mantel/Top (G) using Bolts (AA) and Washers (BB)
through the pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
Hardware Used
AA
Bolt
BB
Washer
CC
Wood Dowel
Fig. 3
x 7
CC
x 7
x 4
Fig. 4
F
x 10
x 10
x 10
Fig. 5
x 6
x 6
x 6
5
H
BB
AA
CC
L
CC
BB
AA
CC
G
CC
BB
AA
CC
E