Twin-Star International 26MM1754 Instrucción De Montaje página 7

6. Locate Left Back Panel (I), Right Back Panel (J) and
Center Back Panel (K), attach to the back of the
completed assembly from step 5. Use a Phillips
Head screw driver, tighten screws (DD) through the
pre-drilled holes in the Back Panels to the
completed assembly.
Hardware Used
DD Screw
7. Connect the Right Front Door (N) to the Right Side
Panel (F) with the hinge pre-installed on Right Front
Door (N), then use a Phillips head screwdriver to
tighten the Screw (EE) through the pre-drilled
holes.
REPEAT WITH LEFT FRONT DOOR (M) ON
OPPOSITE SIDE.
Attach the Knob (GG) to the Left Front Door (M)
and Right Front Door (N), use the bolts attached
through the pre-drilled holes in the doors. Then use
a Phillips Head Screwdriver to tighten the bolts.
Hardware Used
EE
Screw
GG Knob (with bolt)
8. Choose desired height of Shelf (O) and place the
four Shelf Pin (FF) into same height shelf holes
inside side panels. Insert Wood Shelf (O), allow
Wood Shelf (O) to rest on the Shelf Pin (FF).
Hardware Used
FF Shelf Pin
Fig. 6
x 36
Fig. 7
x 12
x 2
Fig. 8
x 8
6
K
J
EE
EE
N
M
DD
I
EE
GG
O
FF