Publicidad
Door Adjustment Section
STEP 6
To adjust your cabinet door
side to side use a 3/8-in
wrench, you will want to use
the "Lock Nut" adjustment,
refer to FIG 6A for the "Lock
Nut" location.
Note: All "Lock Nuts"
must be loose in order
for the door to move
completely left or right.
STEP 7
Tighten "Adjustment Screw"
(this will push mounting
bracket out) until cabinet
door is at desired position.
To add tilt to your door;
whether it be to the left,
right, top, or bottom, use the
adjustment screw
(Fig 6B).
STEP 8
Tighten "T-Nut" to lock filler
against adjustment screws
(Fig 6A).
Note: Refer to the
"Adjustable Rub Bushing
Installation" instructions,
found in the "Adjustable
Rub Bushing Kit" (refer to
I-ARBKIT-0312), included
with this unit.
Rub Bushing Installation
STEP 9
Install the provided rub
bushings in line with the top
rails
(Fig 7).
Note: Wood frame will
need to be removed from
the cabinet once the
appropriate rub bushings
have been selected in order
for the bushings to be
installed.
4
FIG. 6A
Lock Nut/
T-Nut
3
8
FIG. 6B
FIG. 7
Customer Service: 800-626-1126 | rev-a-shelf.com
Adjustment Screw
Publicidad
