Publicidad
Janome 1110DX Instruction Manual
3
1
www.toews.com
5
4
2
6
1
Connecting the Machine to the Power Supply
Before connecting the machine to the power supply,
make sure the voltage and frequency shown on the
machine conform to your electrical power.
1. Turn off the power switch, and connect the
machine plug to the machine socket.
2. Connect the power supply plug to your power
supply.
3. Turn on the power switch.
1 Power switch
2 Machine plug
3 Machine socket
4 Power supply plug
5 Power supply
6 Foot control
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the controller, the faster the
machine runs.
Step on the foot control with the presser foot lifter up, and
practice controlling the speed.
1 Foot control
For Your Safety:
* While in operation, always keep your eye on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, loopers,
handwheel, needle or knives.
* Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
* Do not place anything on the foot control, otherwise
the machine will start inadvertently.
12
1110DX Owners Manual/ User Guide
Publicidad
