Operation Of The Display; General Information Of The Display; Functions Of The Display'S Buttons - BOREAL AIRE Serie Instrucciones De Instalación, Uso Y Mantenimiento

CLEANING TASKS
Clean the internal of the combustion chamber descale in the walls with a correct vacuum cleaner.
Clean the smoke extractor fan, the whole combustion chamber, pellet tank, whole replacement of the seals and put again
silicone where necessary, smoke duct, reservoirs...
Check all the electronic components (electronic board, display, ...)
Check all the electrical components (resistance, smoke extractor fan, ...)

9. OPERATION OF THE DISPLAY

9.1

GENERAL INFORMATION OF THE DISPLAY

The display shows information about the stove performance. Once you access to the menu, you will see different screens and configurations according
to the level of access.
Depending on the working mode, the display may have different meanings depending on the position in the screen.
Currently, Boreal has two types of display, similar aesthetic but the operation is the same.
Drawing shows an example of a stove off.
Drawing shows the layout of the messages during the programming or configuration of the working parameters. Particularly:
VALUE
08:10
M-3-3-01
START
PROG-1
STATE DIALOGUE
1. The screen area saying "VALUE" shows the value that we introduce.
2. The screen area saying "MENU LEVEL" shows the current menu level.
Drawing shows the meaning of the symbols appearing on the left hand side of
the screen. The screen lighting in the section "status" shows the activation of the
corresponding device according to the following list.
9.2

FUNCTIONS OF THE DISPLAY'S BUTTONS

Button Description
Increases
1
temperature
Decreases
2
Temperature
3
Menu (Set)
VALUE
14:24
21ºC
OFF
STATE DIALOGUE
MENU LEVEL
Modality Performance description
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Increases the ambient thermostat temperature value.
PROGRAMMING Modifies/Increases the value of the selected menu.
ON/OFF Decreases the ambient thermostat temperature value.
- Access the menu.
MENU Access the following level in the submenu.
PROGRAMMING Confirms the selected value and move to the following option in the menu.
AMBIENT TEMPERATURE
P-2
POWER
PROGRAMMING ACTIVATED
RESISTOR
AUGER
SMOKE EXTRACTOR
EXCHANGER
CIRCULATOR PUMP (ONLY HYDRO MODELS)
ALARM
EN
√ √
√ √
√ √
√ √
27