Wiring Requirements - Gree GMV-ND28ZD/A-T Manual Del Propietário

Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit
Outdoor Outdoor
unit1 unit 2
LO1
L=LO1+LO2+LO3+Li1+Li2+.......+Lin(n≤80)
Wire Type
Light/Common PVC
Jacket Soft Wire

3.4 Wiring Requirements

Dimension of power cord and capacity of air switch
Models:
GMV-ND28ZD/A-T
GMV-ND36ZD/A-T
GMV-ND50ZD/A-T
GMV-ND63ZD/A-T
GMV-ND71ZD/A-T
GMV-ND90ZD/A-T
GMV-ND112ZD/A-T
GMV-ND125ZD/A-T
GMV-ND140ZD/A-T
Notes:
① The circuit breaker and power cord specification in above sheet are based on max power
(max current) of the unit.
② The power cord specification in above sheet is based on ambient temperature of 40°C.
③ The circuit breaker specification in above sheet is based on ambient temperature of 40°C.
If the working condition is different, please adjust it according to the specification sheet of circuit
breaker.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Outdoor Outdoor
unit 3 unit 4
LO2 LO3
Total Length of
ommunication Wire Gauge (mm
Line L(m)
L ≤ 1000 ≥ 2×0.75
Power specification
220~240V-1ph-50Hz
208~230V-1ph-60Hz
Fig 3.3.2
2
) Wire Standard
IEC 60227-5
Minimum Sectional
Air Switch
Area of Grounding
Capacity (A)
Wire(mm
6
6
6
6
6
6
6
6
6
7
Lin
Remark
If wire gauge is 2X1 mm
it's OK to increase the length of
communication line. But total
length should not exceed 1500m.
Minimum Sectional
Area of Power Cord
2 2
) (mm )
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
2
, then