Replacement Parts/Accessories; Technical Specifications - Grizzly ERM 1231-2 G Traducción Del Manual De Instrucciones Original

Replacement parts/
Accessories
Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you have any other questions, contact
the "Service-Center" (see „Grizzly Service-
Center").
Spare blade .............................. 13700207
Grass box ................................. 91095797

Technical Specifications

Electric Lawnmower ....... ERM 1231-2 G
Motor input power ......................... 1200 W
Mains voltage ........ 220-240 V~, 50/60 Hz
Idling speed ..............................3350 min
Blade width .................................. 310 mm
Cut height ........................ 20 / 40 / 60 mm
Protection class ...................................
Protection type................................... IP24
Weight (without connection cable) ...9.1 kg
Lawn box volume.................................27 l
Sound pressure specification
(L ) .........................84 dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured ....... 92.9 dB(A), K
Vibration (a ) ............. 2.1 m/s
h
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.
Technical and visual modifications may
be made without notice in the course
of further development. All dimensions,
information and specifications in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
-1
II
=3 dB
pA
(L )
WA
=2.41 dB
WA
, K=1.5 m/s
2 2
operating instructions.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).
GB
53