Technical Specifications - VONROC SG503DC Manual De Instrucciones

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
SG503DC
-
S_SG503DC
CD801AA
S2_SG503DC
2 x CD801AA
S3_SG503DC
CD803AA
Machine information
Voltage
Number of staples/nails
Staples
Nails
Sound power level L
WA
Sound pressure level L
PA
Vibration a
h
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
WWW.VONROC.COM
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
30/min
15 up to 25mm
15, 20, 25, 30 and 32mm
100.6 dB(A) K=3 dB(A)
89.6 dB(A) K=3 dB(A)
8.501m/s² K=1.5m/s²
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Machine
2. Battery
3. Battery unlock button
4. LED work light
5. Trigger
6. Cartridge shaft
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
7
EN