Sleep Mode - Suntec Wellness KLIMATRONIC Fusion CleanAir 10.500+ Manual De Instrucciones

1. POWER: Press this key to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
2. TEMPERATURE -: Please set the unit into cooling mode or heating mode (chapter "Heating Operation") and
press this key to decrease the temperature. Pressing this key once reduces the temperature by 1°C. The
minimum adjustable temperature is 16°C.

3. SLEEP MODE:

Cooling mode: Please set the unit to cooling mode, set the desired temperature and press "Sleep mode". The
temperature increases automatically after 1 hour by 1°C and after another 2 hours by 2°C. Then the temperature
setting remains constant.
Heating mode: Please set the unit to heating mode (chapter "Heating Operation") and press this key to enter
sleep mode. The temperature decreases automatically after 1 hour by 1°C and after another 2 hours by 2°C.
Then the temperature setting remains constant.
In sleep mode, the unit runs automatically with a low fan speed; the speed cannot be changed, when using this
mode.
4. FAN SPEED: Please press this key to set a low, medium or high fan speed.
5. TEMPERATURE +: Please set the unit into the cooling or heating mode (chapter "Operation for heating") and
press this key to increase the temperature. Pressing this key once increases the temperature by 1°C. The
maximum adjustable temperature is 31 ° C.
6. TIMER: Please set the unit to standby mode (the unit is connected to the power, but the POWER key has not
been pressed) and press the TIMER key. Now you can set the desired switch-on time using the TEMP + and
TEMP- keys (1h-24h) and confirm with the TIMER key. As soon as the set time has elapsed, the unit switches on
automatically. If the POWER key will be pressed before the course of time, the setting will reset and the unit will
switch on. You can also set the desired mode when you set the timer.
You can also set the timeout by pressing the TIMER button during operation and pressing the TEMP + and TEMP-
buttons to set the desired time (1h-24h) and the TIMER button. As soon as the set time has elapsed, the device
switches off automatically. If the POWER button is pressed before the course of time, the setting is reset and the
device will switch off.
7. MODE: Press this key to choose between cooling, fan, dehumidifying and heating mode.
8. DISPLAY: The display shows the current ambient temperature or the set on / off time, if the timer function
has been activated. As soon as you change the temperature or time setting, they will be shown briefly on the
display; then the display returns to the current data.
The error codes will be also shown on the display. For further information, please refer to the section
"Troubleshooting".
②
Heating Operation
A. HEATING IN INDOOR OPERATION
The FUSION CleanAirunit is in the room to be heated.
Please take out the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER and insert the active carbon
filter. Connect the exhaust hose and the hose connector to the FUSION CleanAir unit as displayed in
the illustration;
22