Suntec Wellness KLIMATRONIC Fusion CleanAir 10.500+ Manual De Instrucciones página 23

The cold extract air has to be led out of the room via the air hose. This can be executed e.g. via a tilted
window, a door or wall aperture. Make sure that no cold outside air can enter the room. For effective
heating, we recommend our selection of various accessories, for example window kit (included in the
package) which reduce or prevent entry of cold air into the room.
Set the function to „Heating". The settable temperature range is between 16°C and 31°C target
temperature. You can set this using the temperature control.
B. HEATING IN OUTDOOR OPERATION
The FUSION CleanAir unit is outside the room to be heated. Outdoor operation is ideal for the transition
period in which outside temperatures do no fall below 15°C. (If the outside temperature should however
fall below 7°C continuously, we recommend indoor operation). Please take out the SUNTEC H13-HIGH-
PERFORMANCE-COMBO-FILTER and insert the active carbon filter. Connect the exhaust hose and
the hose connector to the FUSION CleanAir unit as displayed in the illustration;
Set the function to „Heating". The settable temperature range is between 16°C and 31°C target
temperature. You can set this using the temperature control.
The air with high oxygen content heated by the FUSION CleanAirunit is fed into the room via the
exhaust hose. This can be executed e.g. via a tilted window, a door or wall aperture. Make sure that no
cold outside air can enter the room. For effective heating, we recommend our selection of various
accessories, for example window kit (incl. in the packaging) which reduce or prevent entry of cold air
into the room.
Operation for dehumidification
③
Please take out the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER and insert the active carbon filter.
Please press "MODE", to activade the dehumidifying mode.
automatically with a low fan speed; the speed cannot be changed in this mode.
In the dehumidifying mode, the unit runs
23