Suntec Wellness KLIMATRONIC Fusion CleanAir 10.500+ Manual De Instrucciones página 24

Operation for air purification/"Fresh"-function/ SUNTEC H13-HIGH-PERFORMANCE-COMBO-
④
FILTER
The combination of HEPA filter and active carbon filter forms an optimal filter for removing effectively particles
and odors from the air. The HEPA filter exempt the polluted room air and releases almost 100 percent of dust
and allergy triggers. In general, dust, suspended solids and microparticles are filtered very well. The active
carbon filter ensures that odors and gases are absorbed.

Please insert the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER into the unit.
Note: Please do not use any spare parts, while using the "fresh"-function.
1. Please take out the cover.
3. Please insert the filter into the unit.
5. Please insert the cover.

Please press the POWER button.

The "fresh" indicator turns on.

The unit operates now as an air purifier: The unit sucks the air, the air passes through the installed
SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER and returns as purified air.

You can set the timer function and the fan speed, while using the "fresh"-function.
Note: While operating the unit in "Fresh"-function, it is not possible to change the mode to
dehumidifying, heating or cooling mode. To operate the unit in cooling, heating or in dehumidifying
mode, you need to take out the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER.
Fan Operation
⑤
Please take out the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER and insert the active carbon filter.
Please press MODE to activate the fan.
"Fresh air" Operation
⑥
You can use the advantage of the outdoor fresh air function according to the operation of points 1B and 2B.
With this function, external air is led into the living/work area.
Outdoor Funktion (IP24)
⑦
2. Please take out the filter frame.
4. Please insert the filter frame.
24