Additional Safety Warnings - Ryobi OWS1880 Traducción De Las Instrucciones Originales

before use. Many accidents are caused by poorly
maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
WEED SPRAYER SAFETY WARNINGS
■ Do not spray flammable liquids, such as gasoline, to
reduce the risk of fire or explosion.
■ Always follow the chemical manufacturer's instructions
printed on their product labeling for use, cleaning, and
storage. Chemicals should be stored out of the reach
of children.
■ Do not spray any material where the hazard is not
known.
■ To reduce exposure to spray materials, wear approved
safety equipment, such as face mask designed for
spraying, gloves, and other appropriate protective
equipment.
■ Do not use flammable solvents or abrasive cleaning
agents to clean the product.
WARNING
Keep spray materials away from eyes. If spray materials
come in contact with the eyes, wash them immediately
with clean water. If irritation is still present, immediately
seek medical help.
2 | English

ADDITIONAL SAFETY WARNINGS

■ Never allow children, persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge, or people unfamiliar with these
instructions to use the product.
■ Be aware of any hazards presented by the spray
materials. Before using any pesticide or other spray
materials with the product, carefully read the label on
the original container and follow the instructions.
■ Keep the area clear of all bystanders, children, and pets
while spraying.
■ Ensure that the spray wand is securely connected to
the spray wand handle before using the product. If
necessary, use pliers to attach the spray wand to the
spray wand handle.
■ Remember to properly replace and tighten the spray
tank cover after pouring liquid into the spray tank.
■ Use only consumer-grade water-based lawn and
garden chemicals.
■ Do not use commercial-grade chemicals or chemicals
for commercial or industrial purposes.
■ Do not use caustic (alkali) self-heating or corrosive
(acid) liquids with the product. These can corrode metal
parts or weaken the tank and hose.
■ Do not leave residue or spray material in the spray tank
after using the product. Clean after each use.
■ Do not pour hot or boiling liquids into the spray tank.
These can weaken or damage the hose or spray tank.
■ Do not overfill the tank.
■ Always check for leaks. If any are found, correct them
before using the product.
■ The spray area must be well ventilated.
■ Always inspect both the inside and outside of the
product before each use.
■ Liquids to be sprayed must be as thin as water. Thicker
liquids will not spray properly.
■ Spray materials may be premixed and poured into the
spray tank using a funnel, if necessary.
NOTE: When using a measuring container other than the
measuring cup, or when using a funnel to fi ll the tank,
thoroughly clean and rinse these items after use. When
premixing spray materials, rinse the container used for
mixing.
■ Do not spray where spark, flame, or other source of
ignition is present.
■ Do not spray in the direction of people or animals.
Always spray downwind.
■ Do not smoke, eat, or drink while using the product.
■ Do not discharge directly against skin.
■ Do not let the spray materials come in contact with skin.
If contact does occur, wash immediately with soap and
plenty of water.
■ Aim the nozzle directly at the plants or objects you
intend to spray.
■ Ensure that the spray materials are directed at an area
that will not be damaged by the spray materials.
■ Avoid spraying on windy days. The spray materials can