Restoring Default Settings; Bluetooth Function - Teac NR-7CD Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting (continued)
CD
Playback is not possible.
e If the disc is upside down, reload it with the labeled side up .
e If the disc is dirty, wipe it clean .
e If a blank disc is loaded, replace it with a disc that has record-
ings on it .
e Depending on the quality of the CD-R/CD-RW disc and
recording conditions, proper playback might not be possible .
e This unit cannot play back unfinalized CD-R/CD-RW discs .
The sound skips.
e Vibrations will cause the sound to skip . Install this unit in a
stable location .
e If the disc is dirty, wipe it clean .
e Do not use discs that are scratched or cracked .

Bluetooth function

Cannot show device name.
e This unit does not support the display of symbols or double-
byte characters, including Japanese and Chinese . Use only
single-byte English letters and numbers for the names of
Bluetooth devices connected to this unit .
Cannot change connected Bluetooth device.
e This unit cannot have Bluetooth connections to multiple
Bluetooth devices at the same time .
To change the device connected with this unit by Bluetooth,
end the connection with the currently connected Bluetooth
device before connecting to another Bluetooth device .
Since this unit uses a microcontroller, external noise and other inter-
ference can cause the unit to malfunction . If this occurs, unplug the
power cord, wait for a while, and then turn the unit on again and
restart operations .
28

Restoring default settings

While pressing and holding the MENU button, set
the POWER switch to ON. Release the MENU button
when the "SETUP CLEAR" message appears.
After "SETUP CLEAR" appears for a few seconds, initialization will
complete and the following startup screens will appear .
WELCOME
TEAC
NR-7CD
o The factory default settings are the setting values shown in the
screen images used in the explanations in this manual .
ATTENTION
o Do not put the unit in standby until the screen above appears .
o This operation will restore all settings, including network settings,
to their default values .
c

Publicidad

Tabla de contenido
loading

Tabla de contenido