Maintenance And Cleaning; Noise/Vibration Information - Würth SBS 28-A Traducción Del Manual De Instrucciones De Servicio Original

SBS 28 A.book Seite 13 Freitag, 8. März 2019 8:39 08

Maintenance and Cleaning

Before any work on the machine itself, remove
the battery.
For safe and proper working, always keep the
machine and the ventilation slots clean.
If the machine should fail despite the care taken in
manufacturing and testing, repair should be carried
out by a Würth Master-Service agent.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Electrical devices/tools as well as
batteries/rechargeable
may not be disposed of together with
household waste. Electrical equip-
ment and batteries must be collected
separately and disposed of environ-
mental-friendly at a recycling facility. Check with the
local authorities or your specialist shop for recycling
facilities and collection points.
Transporting Lithium
Batteries
Lithium-ion batteries are subject to the Dangerous
Goods Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international
provisions and regulations.
The user can transport the batteries by road without
further requirements.
Commercial transport of Lithium-Ion batteries by
third parties is subject to Dangerous Goods regula-
tions. Transport preparation and transport are
exclusively to be carried out by appropriately
trained persons and the process has to be accompa-
nied by corresponding experts.
When transporting batteries:
Ensure that battery contact terminals are protected
and insulated to prevent short circuit.
Ensure that battery pack is secured against move-
ment within packaging.
Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
For this Würth tool, we provide a warranty in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth compressed-air and power tools.

Noise/Vibration Information

Measured values
batteries
EN 62841.
Typically the A-weighted noise levels of the tool are:
Sound pressure level: 86 dB (A); Sound power level:
97 dB (A). Measurement uncertainty K =3 dB.
Wear ear protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 62841.
Sawing in wood*: overall vibrational value
a = 18.25 m/s
h, B
*with saw blade, dimension 150 x 1.4/1.9 mm and
tooth pitch 4.2 mm.
Cutting wooden beam*: overall vibrational value
a = 21.17 m/s
h, WB
*with saw blade, dimension 150 x 1.4/1.9 mm and
tooth pitch 4.2 mm.
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 62841 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of the vibrational
impact.
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with differ-
ent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the vibrational impact over the total working period.
Warranty
determined according
2 2
, uncertainty K = 1.5 m/s ,
2
, uncertainty K = 1.5 m/s
to
2
,
13