Tabla de contenido
Publicidad
Electric shock hazard. To avoid personal injury,
disconnect all power sources before performing
maintenance or service.
Electrocution hazard. To avoid personal injury,
always disconnect all power sources before
performing maintenance or service procedures.
Hot surface hazard. To avoid personal injury, allow
the product to cool for the recommended cool down
time before performing maintenance or service.
Burn hazard. To avoid personal injury, allow the
product to cool for the recommended cool down
time before performing maintenance or service.
Optical radiation hazard. To avoid personal injury,
never look directly at the light source.
Moving parts hazard. To avoid personal injury, keep
hands clear and loose clothing tied back.
Fan hazard. To avoid personal injury, keep hands
clear and loose clothing tied back. Always
disconnect all power sources before performing
maintenance or service procedures.
Voltage hazard. To avoid personal injury, always
disconnect all power sources before performing
maintenance or service procedures.
Not for household use.
Mandatory action
Consult the service manual.
Disconnect all power sources before performing
maintenance or service procedures.
Electrical labels
Indicates the presence of a protective earth ground.
Indicates the presence of an earth ground.
Cinema 4K-RGB Product Safety Guide–CP4325-RGB, CP4330-RGB
020-103085-02 Rev. 1 (04-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Additional hazard labels
Important Safety Information
Indicates Class 4 laser
radiation when open. Avoid
eye or skin exposure to direct
or scattered radiation.
CLASS 1 LASER PRODUCT IEC
60825-1:2014
CP4325-RGB wavelengths:
450 nm - 645 nm
CP4330-RGB wavelengths:
450 nm - 656 nm
CP4325-RGB FDA laser
variance (US projectors only)
CP4330-RGB FDA laser
variance (US projectors only)
Indicates a light hazard. Do
not look directly into the lens.
The extreme high brightness
can cause permanent eye
damage. Class 1 Laser Product
- Risk Group 3 according to
IEC 60825-1:2014 and IEC
62471-5:2015
Indicates high leakage current.
Earth connection essential
before connecting the power
supply.
Indicates a light hazard. Do
not look directly into the lens.
The extreme high brightness
can cause permanent eye
damage.
3
Publicidad
Tabla de contenido
