GE 840146100 Manual Del Usuario página 5

840146100 ENv01 1/25/06
1. Make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters.
2. Plug mixer into electrical outlet. Place beaters into bowl.
3. Move the speed control to desired speed, starting at 1 and increasing to a higher
OFF
Eject
4. When finished mixing, move the speed control to 0 (OFF) and unplug mixer.
5. To eject beaters, with speed control set at 0 (OFF) push straight down on the
Speed
Control
Hand Mixer Stabilizer
CAUTION: Never use the stabilizer when the mixer is on. Do not use the stabilizer on
Power Surge
(on selected models)
Press and hold down the button for additional power at any speed.
Eject
Power
Surge
Surge
1:04 PM Page 5
HOW TO USE YOUR MIXER
speed as necessary.
speed control.
MIXER FEATURES
small (1 1 ⁄ quart) mixing bowls or plastic mixing bowls. This fea-
2
ture can be used on most large mixing bowls. Use the stabilizer
while adding ingredients or checking a recipe. To use, TURN
MIXER OFF, then set the mixer on the edge of the bowl
NOTE: Do not use Power Surge for more than two minutes at
a time or motor may overheat.
5