Cleaning And Replacing The Filters - Bissell 2790W Manual Del Usuario

Cleaning and Replacing the Filters

Visit BISSELL.com to find replacement filters.
Pre-Motor Filter
1.
Press the Dirt Tank Release
Button and pull away from
vacuum.
24h
4.
Clean with mild detergent,
rinse and squeeze all excess
water. Allow filters to dry
completely before reinserting.
Post-Motor Filter
1.
Press down on tab to
remove Post-Motor Filter cover
WARNING
• Turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
• Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the Dirt Tank.
10 BISSELL.com
2.
Twist tank cover to the
unlock position then pull up on
handle.
5.
Return Pre-Motor Filters
to the top of the Dirt Tank,
placing the thick foam filter
in last.
2.
Twist filter counter-
clockwise to unlock and
remove from vacuum.
Remove debris from filter by
tapping on the side of a trash
container. This pleated filter
may NOT be washed.
To reduce the risk of electrical shock:
3.
Remove Pre-Motor Filter
from top of Dirt Tank lid by
pulling out.
6.
Put tank cover back on and
twist to lock.
3.
When re-assembling, be
sure to lock the filter back into
place. Reattach the filter cover.