Emptying The Dirt Tank; Cleaning The Inner Cyclone Separator - Bissell 2790W Manual Del Usuario

Emptying the Dirt Tank

For additional maintenance steps, visit support.BISSELL.com.
1.
Press the Dirt Tank Release
Button and grab the handle to
pull the Dirt Tank away from
vacuum.

Cleaning the Inner Cyclone Separator

We have additional maintenance videos for your machine on support.BISSELL.com.
1.
Hold the Dirt Tank over
a trash container. Press the
bottom release button to
empty.
WARNING
• Turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
• Before using your vacuum, make sure that the Dirt Tank is in locked position and that all filters, both pre- and post-filters, are in place. DO NOT
operate your vacuum without these filters.
2.
Hold the Dirt Tank over a
trash bin and press the Empty
Button. Once emptied, snap
bottom back into place.
2.
Twist Cyclone counter-
clockwise and pull down to
remove.
To reduce the risk of electrical shock:
3.
Return the Dirt Tank to
the vacuum by securing the
bottom in place first and then
pushing back until you hear a
"click".
3.
Tap separator against
inside of trash container and
rinse under warm water, if
necessary. Be sure to let it dry
completely before placing back
in Dirt Tank.
BISSELL.com 9