Problem Diagnosis - Fulbat Fulload 1000 Manual De Usuario

PROBLEM DIAGNOSIS

Use «Problem Diagnosis» when an error is displayed, it will
display a series of red LED flashing phenomena to help you de-
termine the error.
The number of flashes indicates the corresponding fault (see list
for details).
Malfunction
When the DC output is reversed
connection,
Error LED - Single
the Error red LED flashes once
flash
and goes
off once.
When the AC output is short-circuited
the
Error LED - Double
Error red LED flashes twice and
flash
goes out
once.
When the charging is in the overheat
Power LED - Triple protection state, the Power red LED
flash flashes three
times and goes out once.
The charger is connected to an
Power LED - Red light
uncorrected battery or the battery is
always on
damaged. Have the battery checked by
a professional.
MAINTENANCE
The charger is maintenance free. If the power cord is damaged,
the charger must be left to the reseller for maintenance. The
case should be cleaned occasionally. The charger should be dis-
connected from the power while cleaning.
For indoor use only.
Do not expose to rain.
FULBAT - www.fulbat.com
Cause/Solution
WEEE - Waste Electrical & Electronic Equipment
Do not dispose of Waste Electrical & Electro-
nic Equipment in with domestic rubbish.
5