Monitor Function - Kasanova K-GYM Manual De Instrucciones

SPIN BIKE
27

MONITOR FUNCTION

A, BATTERY INSTALLATION
Load two 1.5V AA battery in the battery box on the back (after each battery
replacement, all values will be "0")
B, FUNCTIONAL DESCRIPTION
1, Automatic scanning (SCAN): open the screen or press the button to enter the SCAN
state, all the functions of the TIME--SPD--DIST--CAL--ODO--PUL will be automatically
displayed on the main screen.
2,The movement time (TIME): cumulative calculation of movement time from 00:00--
99:59, the user can press the button to select the time value display state.
3, The movement distance (DIST): cumulative calculation movement from the 0.0--
999.9, the user can press the button to select the value of the distance display.
4, Calories (CAL): shows that the cumulative consumption of calories from 0.0--9999,
the user can press the button to select the value of the state of the display value.
Note: this data is only a rough description and cannot be used for medical treatment.
5, The speed of movement (SPEED): show the current speed of the athlete, the value
of 0.0--999.9 KM /Mile/HOUR.
6,Odometer (ODO): the distance between motion and time is 0-9999 km.
7,Pulse (PUL): instant heart rate, 40-240 times / minute, Note: this data is only a rough
description and cannot be used for medical treatment.
8, Reset: hold down the button for about 3 seconds, all the values will be returned to
the "0", the function can be reset.
C, ATTENTION
1, Such as electronic display is not normal, the need to reinstall the battery to try again,
the battery "+", "-" can not be installed.
2, Battery specification: 1 AA 5 1.5V battery