– Tighten strap (Figure 4c to 4e)
– Straps may be trimmed if necessary (Figure 4f to 4 g)
5. To adjust range-of-motion, pull the flexion or extension button and
move to desired angle printed on hinge and release (Figure 5).
6. Place ROM stop locks over flexion and extension stops to limit range
of motion adjustment.
DROP-LOCK INSTRUCTIONS
• Determine the desired lock angle
• Slide drop-lock button toward center of hinge to lock the hinge angle
WASHING INSTRUCTIONS
• Do not wash in washing machine or place in dryer
• Use mild detergent and cold water (30 °C/86 °F)
• Remove pads and wash separately
• Do not immerse hinge & uprights in water
• Do not use bleach or strong detergents
6