GB
IE
Thenecessarytorqueisdependenton:
- thetypeandhardnessofthema-
terialtobetreated;
- thetypeandlengthofthescrews
used.
Motor unit with
multisander
attachment PKGA2
Secure the appliance against
switching on (see "Switch
ing on/off"). If the appliance
is switched on accidentally,
there is a danger of injury.
Wearaprotectivemaskduring
grindingwork.
Attaching/removingsanding
sheet
Thesandingplate(21)isfittedwithVelcrofor
rapidattachmentofthesandingsheet.
Attaching sanding sheet
1. Pressthesandingsheet(23)evenlyonto
thesandingplate(21).Ensurethatthe
holesinthesandingsheetareplaced
abovetheopeningsinthesandingplate.
Removing sanding sheet
2. Simplypullthesandingsheet(23)off
thesandingplate(21).
Connectingdustextraction
Youcanreducedustproductionduringsand-
ingbyattachingadustextractionsystem.
1. Pushtheadaptor(24)intotheopening
onthemulti-sanderattachment(22)as
farasthestop.
2. Connectadustextractorsuctionhose
totheadaptor(24).
38
Makesurethatthedustextractionsys-
tem is suitable for the material to be
cut. This information can be found in
theoperatinginstructionsoftheexter-
nal device.
Ifnecessary,youcanconnectthesuc-
tion hose of a vacuum cleaner with-
outreducer(25)totheadapter(24).
Sanding
• Useadustextractionsystemwhensand-
ingwiththemulti-sanderattachment.
• Movetheapplianceagainstthework-
pieceonceitisswitchedon.
• Cleanthesandingplatebeforeyouat-
tach a sanding sheet.
• Onlyworkwithsandingsheetsinper-
fect condition to achieve good sanding
results.
• Workusinglowandevenpressure.
Thisprotectstheapplianceandthe
sanding sheet.
•
Do not use the same sanding sheet to
sanddifferentmaterials(e.g.metal
andthenwood).
Selection of sanding sheet
Grain size P Application
forpre-sandingroughwood
P 60
surfaces
P80/120
forplainsanding
forfinesandingofprimed
P 240
andpaintedsurfaces